Framed Print : Reel-to-reel tape recorder and reels used by sound engineer Russell Williams II, ca
Framed Photos from Heritage Images
Reel-to-reel tape recorder and reels used by sound engineer Russell Williams II, ca
A metal NAGRA 4.2 reel-to-reel audio recorder used by Russell Williams II as a sound engineer on film sets. The machine is silver in color. The front side of the machine has dials, a meter, a headphone jack, and switches. Each part is designated by black type and numbers. Black type at the top, center of the front side reads: [NAGRA 4.2]. A number is engraved to the right of the machine name and reads: [84543]. There is a silver handle partially covered with black leather (worn), attached to the proper left and proper right sides. The handle can be moved from laying against the top to laying against the bottom (almost 180 degrees). The proper left side of the machine has a speaker, two plugs and four jacks. Each part is identified by black type. The proper right side of the machine has four plugs, two jacks, and a dial. Each part is identified by black type. There is a clear, plastic lid that is hinged in the back and flips open, matching in shape to the top of the recorder (two circles that line up with where the reels would sit), with rounded edges. A piece of Velcro is attached on the underside of the lid. The top has two spindles, one for the supply reel and another for the takeup reel. The spindle on the proper right has a 5 inch reel acting as the supply reel with the majority of the tape on it (2015.29.20b). The spindle on the proper left is a 7 inch reel acting as the takeup reel (2015.29.20c) with only a small amount of the tape on it. The reels can be removed. Along the bottom of the top there are the idle roller, the heads, the lifters, and the pinch roller that help guide the reel through. There is also a lever that can be pushed to the left or the right, to move the tape, in the bottom left corner
Media ID 22177201
© Heritage Art/Heritage Images
1970s Audio Audio Equipment Black History Cultural Heritage Heritage Nmaahc Seventies Sound
12"x10" Modern Frame
10x8 Print in an MDF Wooden Frame with 180 gsm Satin Finish Paper. Glazed using shatter proof thin plexi glass. Frame thickness is 1 inch and depth 0.75 inch. Fluted cardboard backing held with clips. Supplied ready to hang with sawtooth hanger and rubber bumpers. Spot clean with a damp cloth. Packaged foam wrapped in a card.
Contemporary Framed and Mounted Prints - Professionally Made and Ready to Hang
Estimated Image Size (if not cropped) is 23.9cm x 25.4cm (9.4" x 10")
Estimated Product Size is 25.4cm x 30.5cm (10" x 12")
These are individually made so all sizes are approximate
Artwork printed orientated as per the preview above, with portrait (vertical) orientation to match the source image.
MADE IN THE USA
Safe Shipping with 30 Day Money Back Guarantee
FREE PERSONALISATION*
We are proud to offer a range of customisation features including Personalised Captions, Color Filters and Picture Zoom Tools
SECURE PAYMENTS
We happily accept a wide range of payment options so you can pay for the things you need in the way that is most convenient for you
* Options may vary by product and licensing agreement. Zoomed Pictures can be adjusted in the Cart.