Glenn H Curtiss Manufacturing Company Collection

Curtiss OXX-6, V-8 Engine, ca. 1916. Creator: Curtiss Aeroplane and Motor Company
Among the most successful early engines marketed in the United States were those designed and built by aviation pioneer and inventor Glenn Curtiss

Curtiss Robin J-1 Deluxe, 1928-1930. Creator: Curtiss Aeroplane and Motor Company
108E. Three-seat light cabin monoplane. The Key brothers set an endurance record of 653 hours and 34 minutes, June 4-July 1, 1935 in the Robin. Wright J-6-5 engine. High-wing, tailwheel design

Curtiss Ricardo R-6, In-line 6 Engine, ca. 1921. Creator
Among the most successful early engines marketed in the United States were those designed and built by aviation pioneer and inventor Glenn Curtiss in his factory at Hammondsport, New York

Curtiss V-4, V-12 Engine, Circa 1915. Creator: Curtiss Aeroplane and Motor Company
Toward the end of 1915, Curtiss conducted a design study for a large aircraft engine of 224 kW (300 hp) or more. The objective was a power plant for large seaplanes

Curtiss C-4 or D-4, In-line 4 Engine, ca. 1907. Creator
This engine, built by the Glenn H. Curtiss Manufacturing Company of Hammondsport, New York, about 1907 is believed to be a Model C-4 or D-4 engine

Curtiss Model E Flying Boat (hull only), 1913. Creator: Curtiss Aeroplane
Hull of a Curtiss Model E Flying Boat. Full-size aircraft was a single-engine, two-seat, biplane with a pusher engine mounted above

Roberts 4X, In-line 4 Engine, 1911. Creator: Roberts Motor Company
The Model 4X engine was built by the Roberts Motor Company of Sandusky, Ohio. An important design objective was light weight

Curtiss V-X, V-8 Engine, Circa 1915. Creator: Curtiss Aeroplane and Motor Company
Among the most successful early engines marketed in the United States were those designed and built by aviation pioneer and inventor Glenn Curtiss in his factory in Hammondsport, New York

Model, Static, Curtiss D, ca. 1940. Creator: Charles H. Hubbell
Model, Static, Curtiss D, ca. 1940. Wood display model of a Curtiss D biplane pusher aircraft, designed in 1910, in overall natural color. 1:16 scale

Curtiss Chieftain H-1640, Radial 12 Engine, ca. 1928. Creator
Among the most successful early engines marketed in the United States were those designed and built by aviation pioneer and inventor Glenn Curtiss of Hammondsport, New York

Curtiss K-12, V-12 Engine, ca. 1918. Creator: Curtiss Aeroplane and Motor Company
In 1916 Curtiss engineer Charles Kirkham began designing an engine to compete with the Wright Corporations Hispano-Suiza. By late 1917, the prototype K-12 (K for Kirkham) was bench tested

Pump, Hand, "Wobble", Curtiss NC-3 Failed Transatlantic Flight, 1919
7/8 in inlet and outlet. The NC-3 aircrew used this pump to move coolant or fuel in the event of an in-flight mechanical breakdown

Thomas-Morse Model 8, V-8 Engine, 1917. Creators: Curtiss Aeroplane and Motor Company
The Thomas brothers of Upstate New York began experimenting and flying Curtiss-type aircraft in 1908, and developed their own aircraft in the 1909-10 period

Curtiss Conqueror V-1570-53 (G1V-1570-F), V-12 Engine, ca. 1928
Glenn Curtiss of Hammondsport, New York, who built and raced bicycles early in the twentieth century, later raced, designed and built motorcycles and motorcycle engines

Curtiss D-III Headless Pusher, 1912. Creator: Curtiss Aeroplane and Motor Company
Pusher biplane with one 50-horsepower Curtiss V-8 engine. Fabric covered surfaces light yellow. Struts and landing gear orange. In 1909, the G.H

Curtiss CD-12 Prototype (Serial Number 1) V-12 Engine, Circa1921
The CD-12 development history extended over several years, and involved a number of well regarded figures in the aircraft industry

Curtiss Modified Model L, V-8 Engine, Circa 1910. Creator
Curtiss was one of the most successful early American aircraft engine manufacturers. The first Curtiss engines were air cooled but, to achieve higher power

Baldwin Red Devil, 1909-1913. Creator: Thomas Scott Baldwin
Pusher biplane with one 50-horsepower Maximotor B-4 four-cylinder engine. Very similar in layout to the Curtiss Model D " Headless Pusher" of the same time period

Curtiss Challenger R-600, 2-Row, Radial 6 Engine, Circa 1928
The Challenger engine, which followed the water cooled Curtiss V-8 OX-5 engine that powered the World War I JN-4 " Jenny" trainer aircraft, was designed as a lower-cost

Model, Static, Curtiss Hydroaeroplane, 1938. Creators: Paul R
Model, Static, Curtiss Hydroaeroplane, 1938. Wood display model of the Curtiss Hydroaeroplane, in natural finish with gray floats. With pilot figure. 1/16 scale

Curtiss Ely Propeller, fixed-pitch, two-blade, wood and metal, 1911
This propeller is from a Curtiss Model D pusher biplane flown by Eugene B. Ely on January 18, 1911 for the first landing on a ship, the battleship USS Pennsylvania in San Francisco Bay

Curtiss R3C-2, 1925. Creator: Curtiss Aeroplane and Motor Company
Curtiss V-1400 Engine:; Type: V-type, 12 cylinders, water-cooled; Mfg. No. 9; Power rating: 496 kw (665 hp); Bore and Stroke: 12.382 cm (4.875 in.) x 15.875 cm (6.25 in.); Displacement

Curtiss JN-4D Jenny, 1917-1925. Creator: Curtiss Aeroplane and Motor Company
Single-engine, two-seat, U.S.-built World War I trainer aircraft; 90-horsepower Curtiss OX-5 engine. Tan wings, brown and blue fuselage

All Professionally Made to Order for Quick Shipping